Acer G5350 User Manual download pdf (Page 117)

107

To set a Supervisor/User password

1 Use the up/down keys to highlight a password parameter

(Supervisor Password or User Password) then press Enter.

A password box will appear.

2 Type a password then press Enter.

The password may consist of up to six alphanumeric characters

(A-Z, a-z, 0-9).

3 Retype the password to verify the first entry then press Enter

again.

After setting the password, the system automatically sets the

chosen password parameter to Installed.

To change the Supervisor/User password

1 Use the up/down keys to highlight either change password

parameters (Change Supervisor Password or Change User

Password) then press Enter.

2 Type the original password then press Enter.

3 Type a new password then press Enter.

4 Retype the password to verify the first entry then press Enter

again.

To remove the User password

1 Use the up/down keys to highlight the Clear User Password

parameter then press Enter.

Password on

boot

Select Enabled to activate security

check during POST.

Disabled

Enabled

Fixed disk

boot sector

Sets the control level of the hard disk

drive.

Normal

Write Protect

Diskette access Sets the control level of the floppy

drive.

Supervisor

Normal

Parameter Description Option

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 163 164

No comments

Acer G5350 User Manual Page 117