5 Troubleshooting
80
Problems with the network
Network status indicator does not light.
Do the following:
• Check the cabling and network equipment to make sure that all
cables are properly connected.
• Reinstall the network drivers.
• Try another port or hub on the switch.
Diagnostics pass but the connection fails.
• Make sure the network cable is securely attached.
• Make sure you specify the correct frame type in the NET.CFG file.
The controller stopped working when an add-in adapter was installed.
• Make sure the cable is connected to the port from the onboard
network controller.
• Make sure the BIOS is current.
• Make sure the other adapter supports shared interrupts and your
OS supports shared interrupts.
• Try reseating the add-in adapter.
The add-in adapter stopped working without apparent cause.
• Try reseating the adapter first; then try a different slot if necessary.
• The network files driver may be corrupt or deleted. Delete and
reinstall the drivers.
• Run the diagnostics.
AA G320_UG_EN.book Page 80 Tuesday, August 30, 2005 2:34 PM
Comments to this Manuals