Acer Altos G320 User Manual download pdf (Page 47)

Upgrading the system memory

This section includes instructions for removing and installing a memory

module.

Altos G320 has four DDR2-533/667 DIMM slots. Each slot supports

512 MB, 1 GB or 2 GB memory modules. The maximum memory

capacity is 8 GB.

Memory module installation guidelines

• The minimum memory configuration is one DIMM, installed in the

DIMM 1A socket (the socket closest to the the CPU sockets).

However, for optimum performance and dual-channel interleave

operation, a minimum of two identical DIMMs should be installed.

DIMMs must be identical (same manufacturer, CAS latency,

number of rows, columns and devices, timing parameters, etc.).

• DIMMs on channel A (DIMM 1A and 2A) are paired with DIMMs on

channel B (DIMM 1B and 2B) to enable 2-way interleaving. When

only two DIMMs are being used, the population order must be

DIMM 1A and DIMM 1B to ensure dual-channel operating mode.

Refer to the suggested DDR population table below.

Note: Refer to “Mainboard layout” on page 11 for the location of

the DIMM sockets for each processor.

Warning! For best performance and dual-channel

interleave operation, DIMM modules must be installed or

removed in matched pairs, following the socket sequence:

DIMM 1A and 1B first, then DIMM 2A and 2B. DIMM

modules of the same type, banking, stacking technology,

and manufacturer must be installed in the Altos G320

system.

DIMM label Channel Bank Population order

DIMM 1A A 1 1

DIMM 2A A 1 3

DIMM 1B B 2 2

DIMM 2B B 2 4

AA G320_UG_EN.book Page 37 Tuesday, August 30, 2005 2:34 PM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 131 132

No comments

Acer Altos G320 User Manual Page 47