Acer R920 User Manual download pdf (Page 67)

Removing and installing a hard disk drive

The system supports eight hot-plug drive carriers. Each carrier holds a

standard 2.5-inch SAS hard drive.

Note: Use only Acer-qualified HDDs. To purchase an HDD, contact

your local Acer representative.

Caution! To ensure proper airflow and server cooling, all drive

bays must contain either a carrier with a hard drive installed in it

or a hard disk carrier cover.

Determining drive status

Each HDD carrier features two status LED indicators to display the hard

drive status. If you are replacing a failed HDD, determine which drive

has failed by checking the drive status LED. For more information on

how to determine the drive status, refer to “Control panel LED

indicators” section on page 20.

To remove an HDD:

1 Observe the ESD precautions described on page 39.

2 Remove the front bezel. Perform the instructions described in “To

remove the front bezel” section on page 41.

3 If you are removing a failed HDD, determine which drive has failed

by checking the drive status LEDs.

4 Press the green HDD carrier latch (A).

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 205 206

No comments

Acer R920 User Manual Page 67