Acer Altos G530 User Manual download pdf (Page 186)

Appendix D: SCSI RAID configuration

176

If you change the settings in the Hot Spare field, the following

messages appear:

WARNING: Data on drive will be LOST!

Press DELETE if data loss OK or any other key to

cancel.

6 Press the Delete key to ignore.

7Press Esc, then select Save changes then exit this menu.

8 To close the utility and reboot the server, follow the steps below:

(1) Press Esc, then select Exit the Configuration Utility.

The Global properties saved. Hit any key to

reboot message appears.

(2) Press any key to reboot the server.

RAID volume initialization

After you create the RAID volume and saved the changes, the disk

controller will automatically initialize the RAID volume. LSI Logic

1020A supports background initialization, there’s no need to wait for

the initialization to complete. Close the LSI Logic Configuration Utility

after saving the changes.

Using the MegaRAID configuration utility

Turn on the system. When prompted, press Ctrl+M to enter the

MegaRAID configuration utility. After a few seconds, the Management

menu appears.

Loading the RAID card default setting

1 In the Management menu, select Objects, then select Adapter.

The current adapter settings appear.

2Select Factory Default, then Yes to load the default settings.

3Press Ctrl+Alt+Del to reboot the server.

1 2 ... 181 182 183 184 185 186 187 188 189 190

No comments

Acer Altos G530 User Manual Page 186