Acer G540 User Manual Page 124

  • Download
  • Add to my manuals
  • Print
  • Page
    / 146
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 123
Appendix A: Server management tools
114
RAID configuration utilities
RAID option for the Altos G540 system is provided through either the
onboard SATA controller or through an external controller board
option (LSI 1068 SAS controller or LSI MegaRAID SAS RAID controller).
Caution: Creating a RAID volume erases all data previously saved
in the hard drives. Make sure that you back up important files
before starting a RAID configuration process.
Onboard SATA RAID Configuration Utility
This section explains how to create a RAID 1 volume using the onboard
SATA controller.
To enable the onboard SATA RAID controller:
1 Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2 During POST, press F2 to access the BIOS Setup Utility.
3 Select the Advanced | I/O Device Configuration submenu.
4 Change the setting of the SATA Controller Mode Option
field from
Compatible to Enhanced.
5 Change the setting of the SATA RAID Enable
field from Disabled to
Enabled.
6 Press F10.
7Select Yes to save the new SATA RAID settings and close the Setup
Utility.
Page view 123
1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 145 146

Comments to this Manuals

No comments