Acer Altos R720 M2 User Manual download pdf (Page 169)

151

To initialize the Onboard SATA RAID Configuration Utility:

1 Turn on the server and the display monitor.

2 During POST, press Ctrl-M on the RAID BIOS prompt.

To load the factory default SATA RAID setting:

1 On the Onboard SATA RAID Configuration Utility, select

Objects under the Management menu, then press Enter.

2 On the Objects menu

, select Adapter.

3 Select the adapter, then press Enter.

The adapter setting appears on the monitor screen.

4 Change the setting of Factory Default

from No to Yes, then press

Enter.

5 Press Ctrl+Alt+Del to reboot the server.

To create a RAID 1 volume:

1 Access the Management menu.

2 On the Management menu

, select Configuration.

3 On the Configuration menu

, select New Configuration, then

Yes.

The devices connected to the controller are listed in the array

selection window.

4 Use the Up and Down arrow keys to select a drive that you want

to add into the array and that is marked as READY.

5 Use the space bar to associate the selected drive with the array.

After the drive is associated to the selected drive, the drive is

marked as ONLINE.

6 After adding two drives into the array, press Enter.

7 Press Enter again to select another array to configure.

8 Use the spacebar to select the array, then press F10 to configure

the logical drive.

9 Select Accept to use the default setting, then press Enter.

The default RAID level for two disk drives is RAID 1.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 231 232

No comments

Acer Altos R720 M2 User Manual Page 169