Acer Altos G330 MK2 User Manual download pdf (Page 60)

3 System upgrade

10 Install the new processor.

(1) Hold the processor by its edges, then insert it in the socket.

Make sure that the alignment tabs on the socket fit the two

notches located on the edge of the processor. The pins are

keyed in such a way that you cannot install the processor in

the wrong orientation without bending the pins.

(2) Close the retention plate.

(3) Press down on the socket lever while pushing it towards the

center of the processor socket to engage it under the socket

hook.

11 Apply a thin layer of an Acer-approved thermal interface material

to the processor base and the bottom side of the HSF.

Make sure that only a very thin layer is applied so that both

contact surfaces are still visible.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 124 125

No comments

Acer Altos G330 MK2 User Manual Page 60