Acer G630 Technical Information download pdf (Page 129)

Chapter 4 119

No Display Issue

If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace

a non-defective FRUs:

No POST or Video

If the POST or video doesn’t display, perform the following actions one at a time to correct the problem.

1. Make sure that the internal display is selected. On this notebook model, switching between the internal

display and the external display is done by pressing Fn+F5. Reference Product pages for specific model

procedures.

2. Make sure the computer has power by checking at least one of the following occurs:

• Fans start up

• Status LEDs light up

If there is no power, see “Power On Issue” on page 118.

3. Drain any stored power by removing the power cable and battery and holding down the power button for

10 seconds. Reconnect the power and reboot the computer.

4. Connect an external monitor to the computer and switch between the internal display and the external

display is by pressing Fn+F5 (on this model).

If the POST or video appears on the external display, see “LCD Failure” on page 121.

5. Disconnect power and all external devices including port replicators or docking stations. Remove any

memory cards and CD/DVD discs. Restart the computer.

If the computer boots correctly, add the devices one by one until the failure point is discovered.

6. Reseat the memory modules.

7. Remove the drives (see “Disassembly Process” on page 38).

8. If the Issue is still not resolved, see “Online Support Information” on page 183.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 197 198

No comments

Acer G630 Technical Information Page 129