Acer Predator G1-710 User Manual download pdf (Page 75)

6 Upgrading your computer - 75

Installing a memory

1.Perform Pre-installation instructions on page 58.

2.Select an empty DIMM slot.

3.Remove the new memory module from its packaging, handling it by

the edges.

4.Align then insert the memory module into the DIMM slot (1).

5.Push the module to the slot until the retaining clips snap inward (2).

The module is keyed so it can only be inserted in one direction. If the

module does not fit, make sure that the notch in the module lines up

with the tab in the memory slot.

6.Repeat steps 2~5 to install the other memory modules.

7.Observe the Post-installation instructions on page 58.

Note

DIMM slots on the mainboard must be installed only in certain configurations.

Numbers next to DIMM slots correspond to installation sequence.

Be sure to install the memory module in DIMM1 slot followed by DIMM2 slot.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 97 98

No comments

Acer Predator G1-710 User Manual Page 75