Acer Altos R5250 User Manual Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
3 System upgrade
42
Replacing a system fan
Altos R5250 system includes six dual-rotor easy-swap system fan
modules to provide adequate airflow and keep system running cool.
To replace the system fan:
1 Perform the pre-installation instructions described on page 28.
Warning! The system fan becomes very hot when the
system is on. Allow it to cool off first before handling.
2 Identify the defective fan.
3 Disconnect the system fan cable from the backplane board.
4 Grasp the fan and pull it up and away from the chassis.
5 Install the new fan by sliding the new fan into the chassis.
6 Connect the system fan cable to the fan cable connector on the
backplane board.
7 Observe the post-installation instructions described on page 28.
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 141 142

Comments to this Manuals

No comments