Acer Altos G710 User Manual download pdf (Page 159)

149

(3) Pull the stands from the server (3).

3 Remove the inner rails from the mounting rails by following the

steps below:

Note: The rack mount kit contains a bag of screws, two sets of

side handles, rack brackets and mounting rails. The side handles

are attached to the sides of the server. The rack brackets attach

the mounting rails to the server. The mounting rails allow the

server to slide in and out of the rackmount for maintenance

purposes. Each mounting rail consists of: inner rail, middle slide,

and fixed outer rail. The fixed outer piece is screwed onto the rack

bracket with a M4 x L8 metal screw and nut, an inner rail is

attached to the sides of the server with the #8-32 screws and an

middle sliding piece controlled by a steel ball gearing movement.

(1) Extend the inner rail from the mounting rail until the rail

release latch clicks.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 197 198

No comments

Acer Altos G710 User Manual Page 159