Acer VG240YU User Manual download pdf (Page 24)

English

2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to

the right to

navigate to the element you wish to adjust and press the joystick to enter it.

3. Toggle to the left or right to adjust the sliding scales.

4. Over Drive: Select Off, Normal, or Extreme.

5. FreeSync: To control support FreeSync or not, default is On.

---------------------------------------------------------------------------------------------------------

Note:

1. If FreeSync is “ON”, then the Over Drive selection is set to “Normal”

automatically.

2. If FreeSync is “OFF”, then the user can set Over Drive to either one of the

three settings including: (a) Extreme (b) Normal (c) Off.

6. VRB: To choose whether to support dynamic picture more clean control, default is Off.

---------------------------------------------------------------------------------------------------------

Note:

1. PIP/PBP mode is not support VRB.

2. HDR setting: "Auto" is not support VRB.

3. VRB set "On", when to turn on FreeSync, will auto set VRB is "Off".

4. VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto

set VRB is "Off".

5. VRB function does not affect the (Logo, Aim Point, Message and Input Icon)

brightness.

6. VRB setting "On", when detection of Input Timing <75Hz, will auto off the

VRB and gray out to disable.

7. VRB = (Normal or Extreme), because the IC control dynamic picture is

cleaner, so the overall Brightness will be dark, "Extreme" will be darker than

“Normal”.

7. Aim point: Show an Aim point on the screen for shooting games.

-----------------------------------------------------------------------------------------------------------

Note: In PBP mode the Aim point not displayed.

1 2 ... 19 20 21 22 23 24 25 26 27 28

No comments

Acer VG240YU User Manual Page 24