Acer A221HQL User Manual

TABLE OF CONTENTSSpecial notes on LCD monitors...1Information for your safety and comfort...

EN-9PIN NO.DESCRIPTIONPIN NO.DESCRIPTION1.Red9.+5V2.Green10.Logic Ground3.Blue11.Monitor Ground4.Monitor Ground12.DDC-Serial Data5.DDC-return13.H-Sync

EN-10 24-Pin Color Display Signal Cable*PINMeaningPINMeaning1.TMDS Data2-13.NC2.TMDS Data2+14.+5V Power3.TMDS Data 2/4 Shield15.Logic Ground4.N

EN-11Standard Timing Table1 640x48060Hz2MAC640x48066.66Hz3VESA720x40070Hz4SVGA800x60056Hz5SVGA800x60060Hz6XGA1024x76860Hz7XGA1024x76870Hz8VESA1152x864

EN-12INSTALLATIONTo install the monitor to your host system, please follow the steps as givenbelow:Steps1.1-1Connect Video Cablea. Make sure both the

EN-13USER CONTROLSPower Switch / Power LED:To turn the monitor ON or OFF.Lights up to indicate the power is turned ON.Using the Shortcut MenuPress th

EN-14MainMenuiconSubMenuiconSubMenuitemDescriptionN/AUser modeUser defined. Settings can be fine-tuned tosuit any situationN/A modeN/AStandardmodeDef

EN-15Adjusting the OSD settings--------------------------------------------------------------------Note: The following content is for general referenc

EN-16Adjusting the OSD position1Press the MENU key to bring up the OSD.2Using the directional keys, select OSD from the on screen display.Then navig

EN-17Adjusting the setting1Press the MENU key to bring up the OSD.2Using the / keys, select Setting from the OSD. Then navigate tothe feature yo

EN-18Product information1Press the MENU key to bring up the OSD.2Using the / keys, select Information from the OSD. Then thebasic information of

EN-1SPECIAL NOTES ON LCD MONITORSThe following symptoms are normal with LCD monitor and do not indicate aproblem.NOTES• Due to the nature of the fluor

EN-19(VGA Mode)TROUBLESHOOTINGBefore sending your LCD monitor for servicing, please check the trouble-shooting list below to see if you can self-diagn

EN-20(DVI Mode)ProblemsCurrent StatusRemedyNo PictureLED ON·Using OSD, adjust brightness andcontrast to maximum or reset to theirdefault settings.LED

Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Ea

Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the

EN-2Information for your safety and comfortSafety instructionsRead these instructions carefully. Keep this document for future reference. Follow allwa

EN-3Product servicingDo not attempt to service this product yourself, as opening or removing covers mayexpose you to dangerous voltage points or other

EN-4-----------------------------------------------------------------------------------------------------Warning! We do not recommend using the produc

EN-5• LCD MonitorUNPACKINGPlease check the following items are present when you unpack the box,and save the packing materials in case you will need to

EN-6Attaching / Removing the BaseSCREEN POSITION ADJUSTMENTIn oder to optimize the best viewing position, you can adjust the tilt ofthe monitor by usi

EN-7CONNECTING THE POWER CORD• Check first to make sure that the power cord you use is the correct typerequired for your area.• This monitor has a uni

EN-8Power savingThe monitor will be driven into Power Saving” mode by the control signalfrom the display controller, as indicated by the amber-color p