Acer PalmPro 65PE Specifications download pdf (Page 28)

English 24

Maintenance and

Troubleshooting

Lamp Replacement

Refer to Page 11

Cleaning the Lens

Follow these steps to clean the projection lens:

1. Apply a non-abrasive camera lens cleaner to a soft, dry

cleaning cloth (abrasive cleaners, solvents or other harsh

chemicals might scratch the lens).

2. Avoid using an excessive amount of cleaner.

3. Lightly wipe the clean cloth over the lens.

4. Affix the lens cover whenever the projector is not in use.

Troubleshooting

PROBLEMS TRY THESE SOLUTIONS

NO POWER

 Plug the power cord into the AC Inlet.

 Plug the power cord into the power Inlet.

 Wait two minutes after the projector has been

turned off before turning the projector back on.

NO PICTURE

 Check that you have selected the proper input

source.

 Ensure all cables are connected properly.

 Adjust the brightness and contrast.

 Remove the lens cap.

 Is the POWER indictor flashing?

 Is the STATUS Indicator flashing?

IMAGE ISN’T SQUARE

ON THE SCREEN

 Reposition the unit to improve its angle on the

screen.

 Is the vertical offset properly corrected using

the keystone function?

POOR COLOR

 Select the correct video system.

 Adjust brightness, contrast, or saturation.

IMAGE IS BLURRED

 Adjust the focus.

 Reposition the unit to improve its screen angle.

 Ensure the distance between the unit and screen

is within the adjustment range of the lens.

REMOTE CONTROL

DOESN’T WORK

 Replace the batteries with new ones.

 Make sure there is no obstacle between the

remote control and the unit.

Downloaded From projector-manual.com Acer Manuals

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Acer PalmPro 65PE Specifications Page 28

Comments to this Manuals

Related products and manuals for Projectors Acer PalmPro 65PE