Acer P1273B User Manual download pdf (Page 33)

English

Check the information on the splash screen

Take note of the important information on the splash screen. The splash screen

consists of the following items: Projector ID, Acer logo, network information

and instructions.

Projector ID (displayed only when available)

The 4-digit number will not be displayed on the top left of the splash screen

until this option is enabled by the supervisor in the Configure tab under Acer

eDisplay Management. The four digits are given randomly for projector

identification. For more information, please see "Projector ID".

Projector Name (SSID)

The Projector Name and initial Service Set ID (SSID) can be added by the

supervisor on the Configure tab of Acer eDisplay Management. For more

information, please see "Network settings".

Server IP

The Server IP indicates the IP address your projector uses to connect to a wired

or wireless network. It will be 192.168.100.10 for general wireless and wired

connections. The Server IP will be assigned by the wired network with DHCP

enabled. For more information, please see "Network settings".

NOTE: If a RJ-45 cable is not connected, the LAN IP will be 0.0.0.0.

Security: (None, WPA-PSK, WPA2-PSK)

WPA-PSK (Wi-Fi Protected Access - pre-shared key) and WPA2-PSK are other

individual encryption methods with higher level security. The option is enabled

by the supervisor in the Configure tab under Acer eDisplay Management. For

more information, please see "Security settings".

Note: Make sure the LAN/WiFi setting in the projector OSD is On

when using the WiFi Display and DLNA functions.

Follow the instructions on the splash screen to

connect and project

1Check Projector ID, Projector Name (SSID), Server IP and Security option on

the splash screen. Ask your supervisor to set safer key when Security is

enabled.

Downloaded From projector-manual.com Acer Manuals

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 57 58

No comments

Acer P1273B User Manual Page 33