Acer Aspire M3300 Technical Information download pdf (Page 83)

Step 1:

Step 2:

Step 3:

Step 4:

Step 5:

Step 6:

Step 7:

Picture7

Step 8:

Step 9:

Step 10:

1-3: Create SATA RAID 5

Shut down the EUT, unplug the power cable,connect three SATA HDDS to EUT , check the

EUT all devices are connect/plug ok

Press "PWR-BTTN" to power on the EUT,Load BIOS default setting .

At "Integrated_Peripherals" page "OnChip SATA Type" item set is as "RAID" mode,save

and exit.

During BIOS post, press <Ctrl-I> to enter into Intel RAID setup utility.

Select "1" to enter create RAID mode ,if there is no enough avalable space (there was exist a

Raid , delete it ).

Create RAID 5 Mode,enter the RAID name,such as "MyRaid5",default is"Volume0".

Select "RAID5(Parity)" at "RAID Level".

You can select the "Strip Size" and define RAID capacity in "Capactity".

Press "Create Volume" to create RAID5,it will pop the warning message that all data

will be lost,"press "Y" to confirm it.

It will back to create RAID interface,then press "ESC" or select 4 to exit and install

OS.

1 2 ... 78 79 80 81 82 83 84 85

No comments

Acer Aspire M3300 Technical Information Page 83