Acer Aspire 5590 Owner's Manual download pdf (Page 65)

English

• Make sure that the printer is connected to a power outlet and that it is

turned on.

• Make sure that the printer cable is connected securely to the computer's

parallel port or a USB port and the corresponding port on the printer.

I want to set up my location to use the internal modem.

To properly use your communication software (e.g. HyperTerminal), you need

to set up your location:

1 Click on Start, Settings, Control Panel.

2 Double-click on Phone and Modem Options.

3 Click on Dialing Rules and begin setting up your location.

Refer to the Windows manual.

Note: Please note, on first booting your notebook, that you can

skip the Internet Connection setup, as it is not necessary to

complete the installation of your Operating System. After the

Operating System is set up, you can proceed with the Internet

Connection setup.

I want to restore my computer to its original settings without

recovery CDs.

Note: If your system is the multilingual version, the operating

system and language you choose when you first turn on the

system will be the only option for future recovery operations.

This recovery process helps you restore the C: drive with the original software

content that is installed when you purchase your notebook. Follow the steps

below to rebuild your C: drive. (Your C: drive will be reformatted and all data

will be erased.) It is important to back up all data files before using this option.

Before performing a restore operation, please check the BIOS settings.

1 Check to see if Acer disk-to-disk recovery is enabled or not.

2 Make sure the D2D Recovery setting in Main is Enabled.

3 Exit the BIOS utility and save changes. The system will reboot.

Note: To activate the BIOS utility, press <F2> during POST.

1 ... 64 65 66 ... 116

No comments

Acer Aspire 5590 Owner's Manual Page 65