Chapter 2 41
Parameter Description Options
Legacy Diskette A Help: Selects floppy type. Note that 1.25MB 3 1/2”
references a 1024 byte/sector Japanese media
format. The 1.25MB, 3 1/2” diskette requires a 3-
Mode floppy-disk drive.
Enable or Disable Legacy Diskette A
1.44/1.25MB 3 1/2” or
Disabled
Primary Master Show IDE Primary Master HDD size.
User can enter submenu to set some detail
functions
Auto or User or CD-ROM or
ATAPI Removable
Secondary Master Show IDE Secondary Master Device Status.
User can enter submenu to set some detail
functions.
Auto or User or CD-ROM or
ATAPI Removable
I/O Device Configuration Enter submenu to set onboard device configuration
Help: Peripheral Configuration.
PCI IRQ Routing Set Default IRQ of PCI device.
Help: Menu used to set IRQ for PCI Devices.
Auto/ User Select
Legacy USB Support Enabled: Enable support for Legacy Universal
Serial Bus.
Enabled or Disabled
System Boot from Hard
Disk Recovery
Enable D2D function. Enable or Disable
Screen Expansion Help: Options: Enabled or Disabled Enabled or Disabled
IGD-Memory Type Select the amount of the main memory that the
Internal Graphics Device will use. Let UMA= the
amount of pre-allocated memory made available.
UMA 1MB or UMA8MB
Battery Mode Performance This item allows you to select the performance
while battery mode.
Max Batt or Maximum
Performance
Comments to this Manuals