Acer PCI to Ultra SCSI RAID Controllers DAC960PG User Manual download pdf (Page 31)

Controller Start-up

Manual No. 775012 4-5

Global Array Manager (GAM) Client

The controller can be configured using Global Array Manager Client. GAM

Client can also be used from the server or a system client to monitor status

and verify data integrity of disks connected to the controller while the

system and disks are running.

For details on how to install and run GAM Client, refer to the Global Array

Manager Client Software Installation Guide and User Manual.

In Case of Problems

If problems are encountered during start-up, check the following:

• Check SCSI cabling for loose connections, pin mismatches (make sure

pin 1 on the cable matches pin 1 on the connector), bent pins, and

damaged or crossed cables.

• Check cable length. This includes internal bus lengths in enclosures.

• Check termination.

• Check SCSI IDs on all drives.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 85 86

No comments

Acer PCI to Ultra SCSI RAID Controllers DAC960PG User Manual Page 31