Acer PH530 Specifications download pdf (Page 34)

English ...

Appendices

Replacing the lamp

The projector will detect the lamp life itself. It will show you a

warning message “Lamp is approaching the end of its useful

life in full power operation. Replacement Suggested!” When

youseethismessage,changingthelampassoonaspossible.

Make sure the projector has been cooled down for at least 30

minutes before changing the lamp.

Warning:

Lamp

compartment is hot!

Allow it to cool down

before changing

lamp!

Warning:

reduce the risk of

personalinjury,do

not drop the lamp

module or touch

the lamp bulb. The

bulb may shatter

and cause injury if

it is dropped.

Lamp Changing Procedure:

1. TurnthepowerofftheprojectorbypressingthePowerbutton.

2. Allow the projector to cool down at least 30 minutes.

3. Disconnect the power cord.

4. Removethecover.



5. Push up and remove the cover.



6. Remove the 3 screws from the lamp module.



7. Pull out the lamp module.



To replace the lamp module, reverse the previous steps.

Downloaded From projector-manual.com Acer Manuals

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41

No comments

Acer PH530 Specifications Page 34