ไทย
การติดตั้ง
การเชื่อมต่อไปยังคอมพิวเตอร์
1.
ตรวจดูให้แน่ใจว่าโปรเจ็กเตอร์และ
คอมพิวเตอร์ของคุณปิดอยู่
2.
เชื่อมต่อปลายด้านหนึ่งของสายเคเบิลVGA
เข้ากับขั้วต่อ“VGAเข้า”บนโปรเจ็กเตอร์;
เชื่อมต่อปลายอีกด้านหนึ่งเข้ากับขั้วต่อVGA
บนคอมพิวเตอร์และไขสกรูให้แน่น
3.
เชื่อมต่อปลายด้านหนึ่งของสายเพาเวอร
์เข้ากับซ็อกเก็ตเพาเวอร์ACบนโปรเจ็กเตอร์;
เชื่อมต่อปลายอีกด้านหนึ่งไปยังเต้าเสียบ
ไฟฟ้า
การเปิดโปรเจ็กเตอร์
1.
นำฝาเลนส์ออก
2.
เปิดโปรเจ็กเตอร์ก่อนจากนั้นจึงค่อยเปิดคอ
มพิวเตอร์
3.
ปรับตำแหน่งโฟกัสและซูม
4.
รันการนำเสนอของคุณ
การปิดโปรเจ็กเตอร์
1.
กดปุ่มเพาเวอร์สองครั้ง
2.
อย่าถอดสายไฟACออกจากเต้าเสียบ
จนกระทั่งพัดลมของโปรเจ็กเตอร์หยุดทำงาน
ขั้วต่ออินเตอร์เฟซ
คู่มือเริ่มต้นฉบับย่อ
1.
สายเพาเวอร์
(*)
2.
สายเคเบิล
VGA
(*)
3.
สายเคเบิลคอมโพสิตวิดีโอ
4.
สายเคเบิลRS232
5.
สายเคเบิลเอส-วิดีโอ
6.
แจ็คสายเคเบิลเสียง/แจ็ค
7.
แจ็คสายเคเบิลเสียง/RCA
8.
สายเคเบิล
USB
(*)
หมายเหตุ:อินเตอร์เฟซของขั้วต่อขึ้นอยู่กับข้อมูลจำเพาะของรุ่น
หมายเหตุ:
“(*)”
เฉพาะสำหรับ
X1161N
ซีรีส์
English
INSTALLATION
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the “VGA IN” connector on the
projector; connect the other end to
the VGA connector on the computer
and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut
down.
INTERFACE CONNECTOR
Quick Start
1. Power Cord
(*)
2. VGA Cable
(*)
3. Composite Video Cable
4. RS232 Cable
5. S-Video Cable
6. Audio Cable Jack/Jack
7. Audio Cable Jack/RCA
8. USB Cable
(*)
Note: Connector interface is subject to model’s specifications
Note: “(*)” Only for X1161N series.
Comments to this Manuals