Acer V246WL User Manual download pdf (Page 19)

English

7PB

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

a Make sure both the monitor and computer are switched o.

b Connect the VGA video cable to the computer.

c Connect the digital cable (only for dual-input models).

(1) Make sure both the monitor and computer are switched o.

(2) Connect one end of the 24-pin DVI cable to the back of the monitor and

the other end to the computer’s port.

d Connect the digital cable (only for DP models).

(1) Make sure both the monitor and computer are switched o.

(2) Connect one end of the 20-pin DP cable to the back of the monitor and the

other end to the computer’s port.

2 Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3 Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor and the line-out port on

the computer with the audio cable.

4 Turn on the monitor and computer

Turn on the monitor rst, then the computer. This sequence is very important.

5 If the monitor does not function properly, please refer to the troubleshooting section

to diagnose the problem.

AUDIO

AUDIO IN

VGA

DVU-IN

USD3.0 port-supporting

fast charge

USD3.0 port

In order to prevent damage to the monitor, do not lift the monitor by its base.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

No comments

Acer V246WL User Manual Page 19