Acer ED323QUR User Manual download pdf (Page 16)

English

Connecting the Power cord

• Check first to make sure that the power cord you use is the correct type required

for your area.

• Themonitorhasauniversalpowersupplythatallowsoperationineither100/120V

ACor220/240VACvoltagearea.Nouser

-adjustment

isrequired.

• Plug one end of the power cord to the AC inlet, and plug the other end into an AC

outlet.

• Forunitsusing120VAC:

UseaUL-listedcordset,typeSVTwireandplugrated10A/125V

• Forunitsusing220/240VAC:

UseacordsetconsistingofH05VV

-F

cordandplugrated10A/250V

Thecord

set should have the appropriate safety approvals for the country in which the

equipment will be installed.

Power saving

The monitor will be switched to “power saving” mode by the control signal from the

displaycontroller,asindicatedbytheamber-flickerpowerLED.

Mode LEDlight

On Blue

Power saving

Amber Flicker

The power saving mode will be kept until a control signal has been detected or the

keyboard or mouse is activated. The recovery time from “power saving” mode back to

“on” is around 3 seconds.

Display Data Channel (DDC)

To make installation easier, so long as your system supports the DDC protocol, the

monitorisabletoplug-and-play.TheDDCisacommunicationprotocolthroughwhich

the monitor automatically informs the host system about its capabilities; for example,

supported resolutions and corresponding timing. The monitor supports the DDC2B

standard.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 28 29

No comments

Acer ED323QUR User Manual Page 16