Acer EB490QK User Manual download pdf (Page 19)

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1. Connect the video cable

a. Make sure both the monitor and computer are switched o.

b. Connect the VGA video cable to the computer.

c. Connect the HDMI Cable (Only HDMI-Input Model)

(1) Make sure both the monitor and computer are switched o.

(2) Connect one end of the 19-pin HDMI cable to the back of the monitor and the other end to

the computer's port.

d. Connect the digital cable (only for DP models).

(1) Make sure both the monitor and computer are switched o.

(2) Connect one end of the 20-pin DP cable to the back of the monitor and the other end to the

computer's port.

2. Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3. Optional: Connect the audio input socket(AUDIO IN) of the LCD monitor and the line-out port on

the computer with the audio cable.

4. Turn on the monitor and computer

Turn on the monitor rst, then the computer. This sequence is very important.

5. If the monitor does not function properly, please refer to the troubleshooting section to diagnose

the problem.

HDMI

VGA

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

No comments

Acer EB490QK User Manual Page 19