Acer AL1716W Service Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 50
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
2.6.5 Chromaticity: The color chromaticity is measured by
a photometer (CA-210) at 1440x900/60Hz mode and
full white square pattern with contrast/brightness in
default value. The x and y co-ordinates for sRGB,
Reddish, Bluish and User preset mode shall be as
below:
2.6.6 Brightness: The uniformity is determined by using a
photometer (CA-210) to measure luminance on the
center of screen after at least 30 minutes warm up. It
shall be test at 1440x900/60Hz mode and the
brightness and contrast OSD setting for 100%. The
values specified are at an approximate distance
20cm from the LCD surface and at 0 viewing angle.
The full screen white center luminance at user mode
color temperature shall be 250 cd/m typ. and
200cd/m2 minimum (HSD170MGW1-A), and full
screen black luminance center max. luminance <1
cd/m2.
2.6.7 Environmental Requirements:
A. Temperature Ranges:
- Operating Temperature (guaranteed functional
performance): 0~50 degreeC
- Operating Temperature (guaranteed optical
performance): 5~ 35 degreeC
- Shipping Temperature: -20oC to 60oC
- Storage Temperature: -20oC to 60oC
B. Humidity:
- Operating (non-condensing): 10% to 80%
- Shipping (non-condensing): 10% to 90%
- Storage (non-condensing): 10% to 90%
2.6.8 Shipping and Packing: Packaging and wrapping shall
be sufficient to protect the product against damage or
loss during shipment from the supplier to the
destination specified in the purchase order. All
packaging materials are subject to test and
evaluation. The container loading is 2160sets/40'.
The outside dimension of carton box is 482(L)x
127(W) x 423(H) mm.
2.7 Panel General Information
2.7.1 Mechanical Information
2.7.2 Electrical Absolute Rating
TFT LCD Module
Backlight Unit
Note (1)Permanent damage may occur to the LCD
module if beyond this specification.
Functional operation should be restricted to
the conditions described under normal
operating conditions.
(2) Ta =25 degree C
2.7.3 Optical Specification
Sy mbol Condi ti on Min. Typ. Max. Unit Not e
CR 400 500 - (1)(2)
Response time Rising TR - 3 5 (1)(3)
Falling TF - 5 7
YL 200 250 - cd/m*2 (1)(4)(5) (IL=8.0mA)
YL (180) (230) - cd/ m *2 (I L=7.5mA)
Rx 0.595 0.625 0.655
Ry 0.315 0.345 0.375
Gx 0.295 0.325 0.355
Gy 0.525 0.555 0.585
Bx 0.125 0.155 0.185
By 0.115 0.145 0.175
Wx 0.280 0.310 0. 340
Wy 0.300 0.330 0. 360
ΘL 65 70 -
ΘR 65 70 -
ΘU 60 65 -
ΘD 60 65 -
ΘL 75 80 -
ΘR 75 80 -
ΘU 75 80 -
ΘD 75 80 -
BUNI Θ = 0 7 0 7 5 - % ( 6)
Bri ghtness uni for mi ty
ms e c
(1)(4)
Viewing angl e
Viewing angl e
Θ=0 view angle
CR>1 0
CR>5
Hor
Ver
Hor
Ver
Item
Contrast
Whi te luminance (Center)
Color chromati city ( CI E1931)
Red
Gr e en
Bl ue
Wh i t e
Item Symbol Min. Max. Unit Note
Lamp current IL 3 9.0 mA (1) (2)
Lamp frequency fL 30 80 KHz (1) (2)
Min. Typ. Max. Unit
Horizontal (H) 388.7 389.2 389.7 mm
Vertical (V) 254.0 254.5 255.0 mm
Depth (D) 11.2 11.5 11.8 mm
- 1370 1500 g
- - 3.0 Kgf•Cm
Module Size
Item
Weight (Without inverter)
Torque of customer screw hole
Specification Unit
389.2x254.5x11.5 (Typ) mm
367.2 (H) x 229.5 (V) mm
1440 (H) x 900 (V) pixels
0.255 (H) x 0.255 (V) mm
RGB Vertical Stripe
6 bits/262,144 colors
Normally white
Antiglare (3H)
1370 g
2-CCFLs, Top&Bottom edge side
2-ch LVDS
Logic System 2.4 W
B/L System 9.8 W
Backlight
Input Signal
Item
Power Consumption
Outline Dimension
Display Area
Number of Pixel
Pixel Pitch
Pixel Arrangement
Display Color
Display Mode
Surface Treatment
Weight
Item Symbol Min. Max. Unit Note
Power supply voltage VDD -0.3 6.0 V (1) (2)
Logic input voltage VIN -0.3 VDD+0.3 V (1) (2)
2. Flat Panel Specification (continued)
9
Go to cover page
ACER AL1716W
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

Comments to this Manuals

No comments