Acer R720 User Manual Page 103

  • Download
  • Add to my manuals
  • Print
  • Page
    / 186
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 102
93
4 Gently pull the RAID cache upward to remove it from the slot (B).
5 Close the clips.
6 Replace the air baffles and CPU air duct.
7 Observe the post-installation instructions described on page 36.
To install the RAID cache:
1 Observe the ESD precautions and pre-installation instructions
described on page 35.
2 Remove the air baffles. See “To remove the small air baffle”
section on page 45.
3 Locate the RAID cache memory (DDR-2) slot on the SAS mid-plane
board.
4 Open the clips on the slot.
5 Align then insert the RAID cache into the slot (A).
6 Press the holding clips inward to lock the RAID cache in place (B).
Note: Both the RAID activation key and the RAID cache is required
to activate the hardware RAID. For instructions on installing the
RAID activation key, see page 92.
7 Observe the post-installation instructions described on page 36.
Page view 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 185 186

Comments to this Manuals

No comments