Acer Power SP Technical Information download pdf (Page 47)

Chapter 3 41

Standard Disassembly Procedure

This section tells you how to disassemble the system when you need to perform system service. Please also

refer to the disassembly video, if available.

CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it.

Opening the System

1. Place the system unit on a flat, steady surface.

2. Turn the housing back, and remove the screws as shown here.

3. Slide out the side door.

Removing the Front Panel

1. Release the six latches behind the front bezel.

2. Remove the bezel by following the instruction below.

Removing the CD-ROM, the Floppy and the HDD

1. Detach the modem card.

2. Disconnect the relevant cables.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 71 72

No comments

Acer Power SP Technical Information Page 47