Acer P1623 User Manual download pdf (Page 60)

English

7 Image is out of

focus

• Adjust the focus ring on the projector lens.

• Make sure the projection screen is within the

required distance:

X1185/X1185N/P1185:

1.0 m – 11.9 m (3.3' – 39.2')

X1285/X1285N/P1285:

1.0 m – 11.3 m (3.3' – 37.2')

S1285/S1285N:

0.5 m – 3.7 m (1.6' – 12.2')

P1385W/X1385WH:

1.0 m – 9.7 m (3.3' – 31.8')

H5381BD

1.0 m – 10.0 m (3.3' – 32.7')

H6518BD/P1525/H6525BD:

1.5 m – 7.6 m (4.9' – 25.1')

H6502BD:

1.0 m – 9.9 m (3.3' – 32.5')

P1623:

1.0 m – 7.4 m (3.3' – 24.4')

Refer to the "How to Get a Preferred Image Size by

Adjusting Distance and Zoom" section for more

information.

8 Image is stretched

when displaying a

"widescreen"

DVD title

When you play a DVD encoded in anamorphic or 16:9

aspect ratio you may need to adjust the following

settings:

• If you play a 4:3 format DVD title, please change the

format to 4:3 with the projector OSD.

• If the image is still stretched, you will also need to

adjust the aspect ratio. Set up the display format to

16:9 (wide) aspect ratio on your DVD player.

9 Image is too small

or too large

• Adjust the zoom lever on the top of the projector.

• Move the projector closer to or further from the

screen.

• Press "MENU" on the control panel or remote

control. Go to "Image" > "Aspect Ratio" and try

different settings.

10 Image has slanted

sides

• If possible, reposition the projector so that it is

centered on the screen and below the bottom of the

screen.

• Press the Keystone correction keys on the control

panel or remote control until the image becomes

square.

• Press "MENU" on the control panel or remote

control to open the OSD menu. Go to "Image" >

"Auto Keystone" or "Image" > "Keystone" to make

adjustments.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 83 84

Comments to this Manuals

No comments

Acer P1623 User Manual Page 60

Comments to this Manuals