Acer Altos R360 F3 User Manual download pdf (Page 30)

Altos R360 F3 Installation Configuration Guide

NOTE. Please copy Intel Onboard SATA ESRTII RAID driver

(megasr-16.03.2014.1127-1-rhel65-ga-x86_64.img for 64-bit

and megasr-16.03.2014.1127-1-rhel65-ga-x86.img for 32-bit)

from Resource Kit DVD onto a USB floppy drive or USB flash

drive.

NOTE. For OS installation, a USB optical drive is required

as well.

1. Please boot the system from the Red Hat Enterprise Linux 6 Update 5.

2. At Welcome Menu, please press ESC.

3. Type below command and press Enter.

linux dd blacklist=ahci nodmraid

4. Follow the instruction to select the Driver Disk Source to load the driver for Intel

Onboard SATA ESRTII RAID.

5. Follow the instruction and select Intel MegaSR as the install target device for the

installation.

6. Please Select Software Development Workstation.

7. Please follow the general procedure to complete the installation.

Gigabit Ethernet Driver Installation

NOTE. The onboard Gigabit Ethernet driver is included in

Resource Kit DVD. Please check path of the RAID utility in

Windows OS environment first and copy the driver from the

Resource Kit DVD to HDD (e.g. /tmp directory)

1. Stop network service

# service network stop

2. Remove the OS built-in NIC driver

# rmmod ixgbe

3. Change the directory to the driver source and install the driver

# cd /tmp

# tar zxvf ixgbe-<version>.tar.gz

# cd ixgbe-<version>/src/

# make install

# modprobe ixgbe

4. Start the network service to bring up both of the network interfaces.

# service network start

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

No comments

Acer Altos R360 F3 User Manual Page 30