Acer V246HL User Manual download pdf (Page 19)

English

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

a Make sure both the monitor and computer are switched off.

b Connect the VGA video cable to the computer.

c Connect the digital cable (only for dual-input models).

(1) Make sure both the monitor and computer are switched off.

(2) Connect one end of the 24-pin DVI cable to the back of the

monitor and the other end to the computer's port.

2 Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC

outlet.

Turn on the monitor and computer

Turn on

the monitor first, then the computer. This sequence is very

important.

If the monitor does not function properly, please refer to the

troubleshooting section to diagnose the problem.

d Con

nect the digital cable (only for DP models).

(1) Make sure both the monitor and computer are switched off.

(2) Connect one end of the 20-pin DP cable to the back of the

monitor and the other end to the computer's port.

Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor

and the line-out port on the computer with the

audio cable.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

No comments

Acer V246HL User Manual Page 19