7
Acer AT150 F1 Specifications
The primary I/O bus for the main board is PCIe
®
Gen2. The following table lists the characteristics of
the PCI-E bus segments.
PCI express Bus Segment Characteristics of PCI Express Topology
Expansion Slot # # of
slots
Type Bus
Width
1
Vol. Con.
Width
Length
PCIe
2 PCIe
Gen 2 x8 3.3V x16 Full height
PCIe
2 PCIe
Gen 2 x4 3.3V x8 Full height
PCIe
1 PCIe
Gen 1 x4 3.3V x8 Full height
Acer Flex I/O 1 PCIe
Gen 2 x8 3.3V x8
NOTE:
1. Indicates the number of physical electrical lanes running to a PCIe
®
connector.
2. Inserting cards with PCI™ bridges may alter the actual bus assignment number.
3. Slots are enumerated differently based on the operating system. Microsoft® operating systems enumerate
Device ID by bus starting from the lowest bus to the highest.
Intel 82801JR (ICH10R) I/O Controller Hub
Note: Onboard SATA software RAID cannot be enabled when add-on SAS RAID is
enabled.
controller
transfer channels
6 channels
synchronous
(maximum
theoretical)
3 GB/s per channel
non-RAID mode
RAID mode
Serial ATA
Legacy mode
Combined mode
Serial ATA
NCQ (Native Command Queuing)
AHCI (Advanced Host Controller Interface)
supported
(Windows
) 0, 1,5, 10
(LINUX) 0,1,10
Supports multiple logical volumes
• Supports setup through ROM based array
configuration utility installation scripting
NOTE:
This controller requires the software RAID driver to
support hot-plug functions.
Windows Server
2008
Windows Server
®
2008 R2
Comments to this Manuals