Acer A1500 User Manual download pdf (Page 40)

English

Setting

Startup Screen Use this function to select your desired startup screen. If you change

the setting, the changes will take effect when you exit the OSD

menu.

• Acer: The default startup screen of your Acer projector.

• User: Use memorize picture from "Screen Capture" function.

Screen Capture Use this function to customize the startup screen. To capture the

image that you want to use as the startup screen, follow the

instructions below.

Notice:

Before proceeding with the following steps, make sure that the

"Keystone" is set to the default value 0.

• Press "Screen Capture" to customize the startup screen.

• Pop message to suggest user to input native source. The

"resolution" shown in the text is based on native timing. Press

"Start" to go next UI; press "Back" to previous UI .

• A dialog box appears to confirm the action. Show a message:

Adjust the picture size to fit in the red frame and system will

capture your image after pressing "ENTER". Choose "ENTER" to

use the current image as your customized startup screen.

Choose "Back" to cancel the screen capture and exit the

onscreen display (OSD).

• A message appears, stating that the screen capture is in

progress.

• When the screen capture is finished, the message disappears

and the original display is shown.

• The customized startup screen takes effect when there is a new

input signal or when you restart the projector.

Source Lock When Source Lock is turned "Off", the projector will search for

other signals if the current input signal is lost. When Source Lock is

turned "On", it will "lock" the current source channel unless you

press "Source" button on the remote control for the next channel.

Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4,

(CC1 displays captions in the primary language in your area).

Select "Off" to turn off the captioning feature. This function is only

available when a composite video or S-Video input signal is selected

and its system format is NTSC.

<Note> Set your screen aspect ratio to 4:3. This function is not

available when the aspect ratio is "16:9" or "Auto" .

DC 5V Out

(Type 1 series)

Default is "On". Choose "Off" to Disable DC 5V OUT connection.

<Note>

1. DC 5V Out is not supported while in standby mode.

2. That two or about of MHL, Internal 5V, DC 5V Out port supply

power are not supported. And, MHL is at the top priority if three of

them are occupied, and grays out DC 5V Out (OSD) & Internal 5V

(OSD) while MHL enables.

3. DC 5V Out (OSD) sets to off automatically while Internal 5V (OSD)

switches to On, and vice versa.

DC 5V Out

(Type 2 series)

Default is "On". Choose "Off" to Disable DC 5V OUT connection.

<Note>

1. If users want to use the "PgUp" or "PgDn" buttons, change "DC

5V Out" from "On" to "Off".

2. 5V/1A power output if MHL source is not detected.

Warning! The DC 5V Out may happen power conflict if connecting

to PC and result in electric shock and/or injury.

3. DC 5V Out is not supported while in standby mode.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 66 67

Comments to this Manuals

No comments

Acer A1500 User Manual Page 40

Comments to this Manuals

Related products and manuals for Data projectors Acer A1500