Acer Predator G3620 User Manual download pdf (Page 37)

English

Upgrading the system memory

This section explains the procedures for removing and installing a memory module.

System memory interface

The four 240-pin sockets on the mainboard support Double Data Rate 3 (DDR3)

Synchronous Dynamic Random Access Memory (SDRAM)-type DIMMs. You may

install 1 GB or 2 GB DIMMs for a maximum memory capacity of 8 GB.

System memory configuration guidelines

• To ensure data integrity, use only Acer-approved modules in 1 GB or 2 GB

capacities.

• Use identical modules — same specification for size, speed, and organization.

• In minimum configuration, the FDB should be installed in DIMM 2 slot.

To remove a memory module:

1 Observe the ESD precautions described on page 22.

2 Lay the system on its side (components showing).

3 Press the holding clips on both sides of the DIMM slot outward to release the

DIMM (1).

4 Gently pull the DIMM upward to remove it from the DIMM slot (2).

5 If you intend to install a new memory module, proceed to the next section for

related procedure, then observe the post-installation instructions described on

page 23.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

No comments

Acer Predator G3620 User Manual Page 37