Acer Altos R720 Series User Manual Page 84

  • Download
  • Add to my manuals
  • Print
  • Page
    / 186
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 83
3 System upgrade
74
Upgrading the CPU
The server supports two dual-core Intel Xeon processors 5000 sequence
with 2 x 2 MB L2 cache and 1066 MHz or 1333 MHz FSB.
CPU upgrading guidelines
When installing CPUs the following must be observed:
Use only Acer-qualified CPUs.
Each CPU socket include a CPU and heat sink combination.
When two CPUs are installed, both should have identical revision,
core voltage, and speed values.
When only one CPU is installed, it must be installed in CPU 1
socket.
To remove a CPU:
If you are replacing a CPU on the system, the heat sink must first be
removed.
Important: Before removing a CPU from the mainboard, make
sure to create a backup file of all important data.
1 Observe the ESD precautions and pre-installation instructions
described on page 35.
Warning! The heat sink becomes very hot when the system
is on. NEVER touch the heat sink with any metal or with
your hands.
2 Remove the CPU air duct. Perform the instructions described in “To
remove the CPU air duct” section on page 42.
3 Locate the CPU you want to remove.
Page view 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 185 186

Comments to this Manuals

No comments