Appendix B Rack installation guideAA G701 - EN.book Page 99 Monday, March 17, 2003 4:24 PM
Appendix B Rack installation guide108 6 Attach the two side handles to the server using four hex head screws for each handle. 7 Set the server aside.
109Attach the other rack bracket to the remaining mounting rail. 9 Install the mounting rails to the rack using four M6 x L10 screws for each mounting
Appendix B Rack installation guide11010 Extend the middle sliding piece of each mounting rail forward until it clicks. 11 Install the server into the
111 Caution! To avoid personal injury, care should be taken when pressing the component rail release latches and sliding the component into the rack.
Appendix B Rack installation guide112AA G701 - EN.book Page 112 Monday, March 17, 2003 4:24 PM
This appendix shows you how to install the ASM and RDM software package.AA G701 - EN.book Page 100 Monday, March 17, 2003 4:24 PM
105System rack installationAside from its tower configuration, the Altos G701 server system can also be mounted in a rack-model position. A rack moun
Appendix B Rack installation guide102Vertical mounting hole patternThe four vertical rails of a rack contain mounting holes arranged in a manner show
103Screw types for rack installationThe following screws are used in the assembly of the Acer Altos G701 and other rack-mountable components. Screw ty
Appendix B Rack installation guide104Installing cage nutsCage nuts are use to secure systems and other components to the vertical rails in the rack.T
105Installing the system into the rackTo install the system into the rack:1 Remove the front bezel from the server. Refer to “Removing the front beze
Appendix B Rack installation guide106(3) Pull out the rubber stands from the server. There are two sets of rack bracket and mounting rail. The r
107Do the same thing to the other rack bracket. 5 Attach the inner rails to the top and bottom side of the server. (1) Align the inner rail to the f
Comments to this Manuals